- High roundness grade 300 balls in a shop dispenser bottle - 1/4"--250/bottle - 1/8"--500/bottle - 3/16"--500/bottle - 5/16"--250/bottle - 5/32"--500/bottle - 7/32"--500/bottle
Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
Replacement reservoir cap screw for Hope brakes.
RaceFace X-Type Bottom Bracket Outer Race Seal - Replacement for cracked or broken X-Type outer race seals - Sold each
- Aheadset preload adjusting bolt
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool…
- Routes cables underneath the bottom bracket - Will not rust or corrode
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
Stainless steel pedal washers - Sold in pairs
- Black carbon fiber weave headset spacers for tuning ride height, no logos - Kit includes 1-1/8" spacers: (15) 2.5mm, (25) 5mm, (16) 10mm, (2) 15mm, (4) 20mm
This is a drive-side stop washer for your Surly Mr. Whirly Crank. It ensures you're properly spaced out down there.
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Standard replacement star nuts for threadless steerers.
Brass compression olive for Hope hydraulic disc brakes.
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
The Gyro G3 upper top plate is designed for use with the G3 detangler.
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Replacement banjo bolt for Hayes hydraulic Brake systems.
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is…
Basics brake cables provide value on a budget. - Pre-stretched - double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm